Sacrificial anodes
Magnesium, aluminum and zinc alloy sacrificial anodes, organized by material, form and project conditions.
CATHODIC PROTECTION MATERIALS & SYSTEM SOLUTIONS
From sacrificial anodes to monitoring interfaces, start with the right system path.
Material supply, system direction and project support for industrial assets.
A practical entry point for corrosion-protection engineers, technical teams, procurement and project decision-makers.
2012Founded
100+Employees
2023High-tech enterprise
6000+Project solutions
≈10,000 m²Factory area
Choose your starting point
Move from an open requirement to a clear product path
Use the route that matches the information already available. You can start with a product name, or start with the protected asset and operating environment.
You have a product name, material or quantity
Browse by product
Find sacrificial anodes, impressed-current products, test posts, reference electrodes and installation accessories.
Explore this path You know the protected asset or environmentStart with a solution
Enter through pipelines, tanks, vessels, ports, offshore structures or petrochemical facilities.
Explore this pathProduct centre
42 individually listed products across 8 series
Browse the product catalogue by category, then open the series and individual product form that matches the project information.
Impressed-current cathodic protection
Auxiliary anodes and products connected with anode beds, power equipment and system wiring.
Cathodic protection monitoring
Reference electrodes, test posts and products for field potential and current measurement.
Cathodic protection installation accessories
Thermite welding, wiring, insulation, repair and other installation accessories.
The current catalogue contains 42 individually listed product forms. Final selection remains subject to the asset, medium, installation and project documents.
Solution paths
Start with the protected asset and operating environment
Each solution path connects the asset, environment, protection focus, technical route and product direction before the inquiry is prepared.
01Cathodic protection for oil & gas pipelines
Cathodic protection materials, impressed-current options, monitoring products and project support for buried oil and gas pipelines.
View solution
02Cathodic protection for utility pipelines
Cathodic protection materials and system interfaces for buried gas, water and other urban metallic utility networks.
View solution
03Cathodic protection for storage tanks
Cathodic protection products and project support for tank bottoms, internal metallic structures and connected piping.
View solution
04Cathodic protection for marine vessels
Aluminum and zinc sacrificial anodes, installation forms and project support for hulls, tanks and underwater metallic structures.
View solution
05Cathodic protection for port and wharf steel piles
Cathodic protection products and installation support for steel piles, trestles and underwater port structures.
View solution
06Cathodic protection for offshore structures
Sacrificial anodes, monitoring and installation support for offshore platforms and other marine metallic structures.
View solution
07Cathodic protection for petrochemical facilities
Cathodic protection materials, system interfaces and project support for process units, buried networks and storage facilities.
View solution
08Cathodic protection for PCCP and water pipelines
Cathodic protection materials, monitoring and system interfaces for PCCP and water infrastructure.
View solutionEngineering evidence
Connect product form, installation and monitoring
The information on this site supports a practical project conversation: protected structure, site conditions, connection method and monitoring interface.
Buried pipeline anode installation
Coordinate anodes, connections and construction support around the pipeline structure and site conditions.
Field anode installation
Product geometry and connection method need to match the protected facility and construction boundary.
Testing and monitoring interfaces
Test posts and reference electrodes support system testing and operational checks.
Tank anode installation
Tank bottoms, internal structures and connected piping influence anode form and connection.
Project discussion
A five-step route from project conditions to delivery scope
The same information helps technical, procurement and project teams keep the discussion aligned.
Define the asset
Identify the pipeline, tank, vessel, port steelwork or other protected structure.
Review conditions
Consider medium, soil or water, installation position, drawings and protection range.
Match the route
Discuss sacrificial anodes, impressed current or monitoring and accessory interfaces.
Prepare delivery
Confirm product form, specification, quantity and project stage.
Coordinate field work
Align installation, testing and construction support with the project scope.
Technical resources
Read the route before you specify the product
Short technical and product notes help frame the asset, medium, form, monitoring and project inputs.
Company news
Libo shares its company qualification documents
Selected company qualification documents and a photograph of the Libo premises are now available in the news center for project discussions and document review.
Read resource Product knowledgeCommon forms of magnesium alloy sacrificial anodes
From packaged and ribbon forms to high-potential and rod anodes, review the product directions and the information useful before an inquiry.
Read resource Technical resourceWhat information helps start a cathodic protection project discussion?
The protected asset, operating environment, cooperation scope and available drawings or quantities are the four most useful starting inputs.
Read resource Product knowledgeFinding sacrificial anodes by magnesium, aluminum or zinc
Use the three material directions as a first product entry, then review the asset, medium, form and installation conditions.
Read resourceQuestions before inquiry
You can start with incomplete information
The protected asset, environment and known product direction are enough to begin a useful discussion.
Should I start with products or solutions?
If you know the product name, material, form or bill of materials, start with Products. If the product direction is open, start with the protected asset and environment in Solutions.
View solution pathsCan I discuss a product direction without a final model?
Yes. Share the protected asset, medium, installation position, quantity and any drawing or bill of materials available.
Prepare an inquiryWhat other components may be needed?
Depending on the route, a project may also involve test posts, reference electrodes, cables, connections, backfill and insulation. The final composition should follow the project documents.
Review the technology guideWhat should I send with a drawing or purchase list?
Keep the product name, form, dimensions, quantity, installation position and project stage together when you contact the team.
Contact LiboProduct, system or project requirement
Share the conditions you already know.
Use the product context, solution path, phone or email to continue with Libo.